Cycling has seen all kinds of advancements and one of them is tubeless tires. By now a large portion of you out there have either tried or gone over to riding tubeless wheels. If you have you know how much of a pain in the ass it can be to fill your tire with the Stan’s sealant and then get the rest of the tire seated on the rim. I have the answer for you!
Instead of seating one side of the tire then partially seating the other, holding it in place while trying to pour the sealant in, and then attempt to finish seating the tired without it coming undone and spilling the sealant. Try the below.
Seat both beads of the tire then install it on your bike in a stand. Then take a tire lever and use the lever to unseat the tire and twist. You will now have a small gap between the tire and the rim in which you can pour the sealant in. Release the tire lever reseating the tire and add air seating the bead. Now just continue as you would normally coating the inside of the tire with the sealant.
No mess, and no more asking someone to hold the tired on the bead while adding the sealant. “Twist and Pour”.
Items you need to go tubeless:
Stans NoTubes Tubeless Bicycle Tire System
Stans NoTubes Tubeless Rim Strip
Stans NoTubes Yellow Spoke Tape
Get out there!
Wondering how you can support the next adventure? Simply support the following and you will be. Feed the Machine, Backcountry.com, and Amazon.
Leave a ReplyWant to join the discussion?
Feel free to contribute!